Maxus 3 Vape Kit by Freemax

The Freemax Maxus 3 vape kit offers a sub-ohm device equipped with the latest Freemax M Pro 3 tank. Powered by two external 18650 batteries (sold separately), the Maxus 3 is capable of up to 200W power output. Packed with five vaping modes alongside the latest coil technology, you can fine-tune the device to your desired preference for the perfect sub-ohm vape with a Direct To Lung (DTL) inhale.

Features

• 5W-200W Power Output
• 1.06" TFT Screen
• M Pro 3 Tank
• Top-Fill Design
• Dual 18650 Battery (not included)
• 5 Output Modes

With a clear 1.06" TFT screen combined with full spectrum RGB lighting, the Maxus 3 offers a completely customisable display to enhance your vaping experience. With everything you need clearly displayed on the screen, you can view your current settings, battery percentage, puff counter, and coil resistance at a glance.

Vaping Modes:

The Freemax Maxus 3 device offers an impressive array of vaping modes to ensure that you have everything on hand to optimise your vaping experience. Below we highlight each mode with a short explanation of what they do.

Power: This is the most common mode found on vape kits. In power mode, you can set the wattage for the device which will be used through every inhale. As the battery levels begin to drop, especially at lower ends you may need to lower wattage settings to draw vapour from the device.

VPC: Variable Power Curve. This allows you to specify varying wattage based on the duration of the inhale. This mode will start with a higher wattage that will ramp up fast and then go down to a lower wattage at the end of the draw to prolong the life of your coil.

Bypass: Battery Voltage mode. When in this mode the device will replace variable wattage and fire the device based on the power levels of your batteries. As your battery levels begin to drain, the power draw will also be lowered.

TC: Temperature Control. In this mode, you will select a temperature as opposed to other modes and the device will work to ensure that the same temperature is maintained throughout your draw to prevent any dry hits while lengthening the lifespan of your coil.

TCR: Temperature Coefficient of Resistance. This mode is designed for custom wire types. Instead of the device knowing how much the resistance of the coil will change, entering a TCR value will tell it how much the resistance will change overall.

How to fill the M Pro 3 Tank

The Maxus 3 vape kit comes combined with the M Pro 3 Tank which offers a simple top-fill design. To fill, slide the top of the tank outwards to reveal the fill hole in the top. Insert e-liquid into the hole until full. Once the tank is full, slide the top back into place ensuring it is flush and in place. If it is your first time filling the tank ensure to leave standing for a few minutes before vaping to ensure the coil is adequately soaked to prevent premature burning.

Compatible Coils & E-Liquid

The M Pro 3 Tank is compatible with Freemax M series coils with both the M1-D 0.15ohm and 904-L M2 0.2ohom coil packed in the box to begin vaping. With each coil built with a mesh structure design, you're sure to experience unparalleled flavour with a much greater heating speed and vapour production.

With lower resistance coils, the Maxus 3 vape kit is best paired with higher VG e-liquids such as shortfills.

Box Contents

• 1x Freemax Maxus 3 Device
• 1x Freemax M Pro 3 Tank
• 1x M1-D 0.15ohm Mesh Coil
• 1x 904-L M2 0.2ohm Mesh Coil
• 1x Glass Tube
• 1x Silicone Ring
• 1x Type-C Cable
• 1x Warning Card
• 1x User Manual
• 1x Warranty Card

Maxus 3 Device Specifications

• Size: 43,0x33.8x87.4mm
• Output Wattage: 5-200W
• Input Voltage: 6.6-8.4V
• Resistance Range: 0.1-3ohm
• Output Modes: Power/VPC/Bypass/TC-SS316/TC-NI/TC-TI/TCR123
• Battery: External 18650 Battery x2 (not included)
• Charging: USB Type-C, 5V/2A
• Weight: 185g

M Pro 3 Tank Specifications

• Size: 28.0x58.85mm
• Capacity: 2ml
• Thread: 510
• Drip Tip: 810
• Weight: 72.2g

The Maxus 3 device offers a full spectrum lighting display which can be customised with a combination of styles to light up your vaping experience.

Powered by two 18650 batteries (sold separately), the Maxus 3 vape kit is capable of up to 200W power output whilst catering to fast USB type-C charging.

The 1.06-inch display on the Maxus 3 device offers five thee colours with a random colour option available. The device can also be locked to prevent accidental button presses when in your pocket or being carried.